American Safety® Nonslip Floor & Deck Coating

Better Traction for People and Equipment

Keep pedestrians sure footed and wheeled equipment from sliding with this tough, long-wearing protective coating. Assures a slip-resistant surface. Protects against weathering and moderate chemical and petroleum contact. Perfect for work areas, ramps, loading docks, industrial flooring, machinery spaces and more.
Specifications: Moisture cured, anti-slip urethane coating can be rolled, troweled or squeegeed to achieve varied textures. Fast cure allows foot traffic in eight hours; full cure in 24 hours. Moderate flexibility for use on wooden substrates. Anti-slip properties are not substantially affected by water, oil, grease, drilling mud, jet fuel or gasoline. Unit contains a 1/2-gal. can of resin and a 7-lb. bag of nonskid aggregate. Coverage: 25-35 sq. ft. per gal. at 1/32" to 1/16" depth. VOC: 2.8 lbs. Pot life: one hour at 72° (22°). Flash point: 77° (22°) SETA closed cup. Haze gray.
Application: Minimum temperature of 40° (4°) and maximum of 90° (32°). Must be 5° (3°) above dew point with maximum relative humidity of 85%. Clean up with xylene.