Calibration Gas Cases, Tubing and Regulators

Calibration Gas Cases, Tubing and Regulators Close

Calibration Gas Cases accommodate two, three or four cylinders while providing a safe and convenient method for transporting and storing calibration equipment. There's even room for your Tubing and Regulators. Carry the Dual-Cylinder Transport Case over your shoulder or attach to your belt and free your hands on the go. Calibration Gas Tubing provides the connection between the regulator and an appliance, such as a gas detector. Gas applied to the regulator travels through the tubing to deliver an accurate sample of the gas to the detector. Tubing is made of Tygon and is recommended for nonreactive gases. Reactive gases, including Chlorine, Phosphine and Ammonia, require FEP tubing. Calibration Gas Regulators control the flow of gas and lower the pressure from the cylinder to the gas detector or air monitor. The Regulators not only act as a control regarding the flow and distribution of gas but also as a safety barrier between the high pressure of the cylinder and the monitor. Reactive gases, including Chlorine, Phosphine and Ammonia, require stainless steel regulators to prevent any reaction or corrosion that could decrease the calibration accuracy.