Check-Temp Calibrators

Check-Temp Calibrators Close

Check-Temp Calibrators
Test and Calibrate Food Service and Laboratory Dial and Digital Thermometers
It is vital to check the accuracy of thermometers, particularly those used in food service applications, frequently and with the proper equipment. Check-Temp calibrators provide a stable single temperature point heat source to make calibration a snap.
Specifications: Each certified unit features dial adjustment and a holding feature to make calibration quick and easy. No. 66495 is a 25W unit with a setpoint of 40° It requires only three minutes heating time and it's ready to use. No. 66497 is a 45W unit with a setpoint of 160° and a heating time of ten minutes. No. 80839 is a 25W unit with dual set points of 40° and 160° Switch from high to low in only 5 minutes. Each calibrator is accurate to ۪° and is stable to less than +/- 0.1° Calibrators are constructed from stainless steel, weigh 9 lbs. and measure 3-1/16" x 6-5/8" x 10-7/8" Accepts stem diameters up to 0.150" Each unit comes with a dial adjustment tool, cleaning brush, certificate of calibration and an instruction package.
Compliance: UL listed.