Scienceware® Tubing Clamps

Scienceware® Tubing Clamps Close

Pick the Clamp best suited to your application—sizes and styles for tubing with outside diameters ranging from 1/32 to 3/4". Screw Clamp is molded Delrin™, parallel action. On/off and fine control is accurate enough to replace stopcocks in many applications. Installs without disconnecting tube or interrupting operation. Autoclavable. Resists many acids, alkalis and organic solvents. Serrated Jaw Clamp is for secure closure on thin-walled tubing—|1/32" or thinner; acetal. Locks closed; springs open when tab is released. Installs at any point and can be left open in captive position. Swing Jaw Clamp is zinc-plated steel. Its nonslip closure works on all flexible tubing—even heavy-wall vacuum lines. Knurled nut bears down on swinging jaw with smooth clamping surfaces. Install/remove without disconnection. Clamp-Screw Compressor is nylon and accepts tubing in angled jaws that prevent the tube from slipping out. Tubing Clamps are acetal and will not distort, rust or corrode. Throttle flow from full open to complete closure with No. 53543 (15-position stepped control) or No. 53544 (12-position ratchet control).