Interested in having timely and informative safety-related information sent directly to your e-mail box? LSS publishes our no-charge Saf-T-News every other week. To begin receiving your copy, click here.

Working With Mercury

Mercury is the only metal which remains in liquid state at room temperature. In the environment, mercury is found in three forms: metallic mercury, inorganic mercury salts, and organic mercury compounds. Regardless of its form, mercury seems always to be in a state of constant conversion—and its degree of toxicity varies accordingly. Because of this tendency, elemental mercury, when heated or spilled, creates a particularly hazardous situation.

For years, mercury has been used in a number of processes, products, and laboratory operations. Today mercury is commonly found in thermometers, manometers, paint, some fluorescent light bulbs, batteries, and mercury reagents. The largest sources of mercury in municipal solid waste (MSW) are household batteries, electrical switches, and fluorescent lamps.

Workplace Standards

Because of mercury's high toxicity, the American Conference of Governmental Industrial Hygienists (ACGIH) has set its Time Weighted Average (TWA) for mercury vapor at 0.025 milligrams per cubic meter (mg/m³), with no allowable short term exposure limit (STEL), plus a Skin Notation (a warning to the effect that a given substance is easily absorbed through the skin). The NIOSH Immediately Dangerous to Life and Health (IDLH) limit is set at 10 mg/m³.

Effective June 30, 1993, the Occupational Safety and Health Administration (OSHA) has revoked its "Final Rule limits" set forth in Table Z-1-A of 29 CFR 1910.1000, implementing the Court of Appeals decision in American Federation of Labor and Congress of Industrial Organizations (AFL-CIO) vs. OSHA, which succeeded in vacating those limits. OSHA's "Transitional limit" of 0.10 mg/m³, a product of that action, remains in effect (see 29 CFR 1910.1000, Table Z-2) and is strongly enforced.

Medical Effects

Mercury commonly enters the body through inhalation, skin absorption or consumption. Symptoms of mercury poisoning can include coughing, chest pain, painful breathing, bronchopneumonia, tremors, insomnia, irritability, headache, fatigue, gastrointestinal distress and liver and kidney damage.

Chronic exposure to low levels over time may cause mental and motor disorders resulting from damage to the central nervous system. Acute exposure to high levels of mercury vapor often leads to severe respiratory damage. Mercury can be absorbed through the skin; physical contact causes burns to skin and eyes. In such cases, the burning sensation is delayed several hours and gives no warning to exposure. If overexposed to mercury vapor, move to fresh air immediately. Should mercury contact your skin, remove your clothing immediately and wash the area with mild soap and large amounts of water for 15 minutes. In case of eye contact, flush your eyes with water for a full 15 minutes. Seek medical attention immediately.

Always handle mercury with the utmost care. Gloves are a necessity. Make sure your gloves are constructed of a material —such as polyethylene or nitrile—appropriate for keeping mercury away from your skin. Wear chemical safety goggles, a full face shield and impervious aprons or clothing to prevent skin contact.

Respiratory protection is also critical. Because mercury is odorless, an air-purifying respirator (APR) with chemical cartridges may be used only if the airborne concentration is less than 10 mg/m³. Mercury concentrations above this level require the use of a positive pressure supplied air respirator or a self-contained breathing apparatus (SCBA).

Mercury Spill Procedure

Since mercury spills present a serious health hazard if handled improperly, special considerations are needed to protect clean up personnel and those nearby. For indoor spills, check clothing and footwear for contamination and to avoid the spread of mercury in to other areas. Open all nearby windows and shut off the ventilation system, if applicable. For outdoor spills, ventilation is typically not as crucial, but mercury spilled on uncompacted or loose soil may migrate deep into the soil due to its high density and heavy weight. For small spills, use sand to contain the mercury or an amalgamate such as the LSS brand, Hg Absorb Powder, to bind with the mercury and reduce vaporization. For large spills, dike the area far in advance of the spill for later reclamation or disposal. Mercury-approved vacuums are commonly used on large spills. For all spills, isolate the area immediately. Clean-up personnel should wear the appropriate PPE clothing, gloves and SCBA-type respirators.

Waste Minimization

Since the 1970s, the use of mercury in products and materials has decreased significantly. Its extreme toxicity has encouraged the development of alternative materials and processes. Always look for alternative solutions. For instance, broken thermometers represent one of the largest single sources of mercury spills. Whenever possible, choose thermometers made without mercury. Packaging is another source of environmental mercury contamination. Fourteen states have enacted legislation to reduce mercury and other heavy metals content in packaging. All of these statutes are based on principles established in the Model Toxics Legislation developed by the Source Reduction Council of the Coalition of Northeastern Governors (CONEG).

Look for alkaline batteries that contain less than 0.025% mercury. Fourteen states now have laws regulating the recycling of lead acid batteries and mercuric oxide batteries. Recycling is preferred over land filling, except for the alkaline batteries. Contact the manufacturer of your mercuric oxide batteries to find the recycling deposit site nearest you.

The EPA regulates mercury-containing fluorescent lamps under the Resource Conservation and Recovery Act (RCRA). Small quantity generators may dispose of these lamps in an approved hazardous waste landfill (RCRA Subtitle D facility). Do not break the lamps before land filling. Never incinerate the lamps; this process releases mercury vapor into the atmosphere. Mercury compounds may then be returned to earth, polluting lakes and soils. Recycling your lamps is the best solution. Contact your regional EPA office or your state’s Hazardous Waste Management office for the location of an approved landfill or a lamp recycling facility.

Commonly Asked Questions

References

U.S. Dept. of Labor, Occupational Safety & Health Administration - Occupational Chemical Database, 2007.

NIOSH Pocket Guide to Chemical Hazards, 1990

TOMES Software

"Mercury," Chemical Health & Safety, Ashbrook, P., Klein-Baneiy, C., August/September 1994, p. 32.

Mercury Refining Co., Inc.
1218 Central Avenue
Albany, New York 12205
1-800-833-3505
(Fax: 518-459-2334)

Wisconsin's Reduction of Toxics in Packaging Law, Section 100.285, Wisconsin Statutes

"PCBs & Mercury: The Terrible Twins of Lighting Disposal" (Second of Two Parts), Health Facilities Management, August 1994

"Final Report: Household Batteries Waste Management Study," State of Wisconsin, Department of Natural Resources, Madison, WI, February 28, 1992

FREE Technical Support
When you have a question, you can rely on our team of technical experts. They'll answer your questions about product specifications, chemical compatibility, regulatory issues, and general worker safety and health.
Call our Safety TECHline™ Technical Support toll-free: 800-356-2501 (6 a.m. to 9 p.m. CT, Monday - Friday). Or e-mail our Technical Support Staff at techsvc@labsafety.com anytime!

FREE Catalog
For products to meet all your workplace safety and industrial needs, turn to Lab Safety Supply. In it you'll find thousands of safety and industrial products, plus a complete service package and our 100% guarantee to stand behind them.
Click here to select a catalog and fill out a request form on-line, or call today to reserve your free copy: 800-356-0783 (7 a.m. to 9 p.m. CT, Monday - Friday).