JUSTRITE® Type I and Type II Safety Cans

Type I coated steel cans are best for petroleum-based solvents when solvent purity is not a factor. Polyethylene cans are best for tech-grade and high-purity chemicals.
Construction: Type I Coated Steel Cans are 24-ga. steel with red powder-coat finish on all exterior surfaces. Small cans (1 gal. and less) have trigger handles. Large cans have swinging handles for easy handling of 60 lbs. or more. All sizes include free-flowing, double-mesh flame arrestor and spring-mounted relief-vent mechanism. Synthetic cap gasket is unaffected by flammable, volatile or viscous liquids. Type II Coated Steel Cans have a built-in flexible metal hose to assure you of accurate, spill-free pouring. Two openings, one for pouring, one for filling. Vacuum breaker and pour valve on 3- and 5-gal. cans open simultaneously for even dispensing. Fill spouts of 1- and 2-gal. cans have self-closing, pressure relief caps with built-in vacuum breaker relief. Flame arrestors in both openings prevent flashback. High-density Polyethylene Cans are dent and puncture resistant for safe, long-lasting service. Special bonding feature allows for use with bonding/grounding wires. Free-flowing, double-mesh flame arrestor. Spring-mounted relief vent prevents explosion or rupture. Synthetic cap gasket remains flexible for a safe, tight seal. Choose Stainless Steel Fittings for use with corrosives, or Plated-Steel Fittings for use with flammable liquids. Funnels, sold separately, help with accurate dispensing. Available for Coated Steel and Polyethylene Type I Cans. No. 123709 is a slip-on polypropylene funnel for use with Coated Steel Cans only. No. 24784 has a galvanized hose and bolts onto a Coated Steel Can. No. 24783 has a galvanized hose and bolts onto Polyethylene Cans only.
Compliance: All cans are C-UL U.S. listed. FM approved.